Close

Pipebending Equipment

ONLY £449.99

RPMS-R-MK2 Heavy Cast Router Table with Sliding Table

(RPMS-R-MK2)
RPMS-R-MK2 Heavy Cast Router Table with Sliding Table
A good router table not only extends the versatility of your machine, it makes repeatable and accurate work much easier. Using a table with properly guarded fences for your work can also improve safety. Our popular table has been upgraded in several key areas to provide even greater value for money.
The RPMS-R Router Table is a heavy and well specified accessory suitable for a wide variety of routers and applications. The heart of this table is its finely ground cast iron table which provides a solid and stable foundation for all functions. When you consider the weight, power and speeds of modern 1/2 routers the importance of a solid table should not be underestimated and weighing in at 54 kg the RPMS-R is one of the heaviest on the market, with the wide base and angled legs adding even greater stability.
In addition to the main cast table, there is a sliding aluminium table with cross cut mitre fence and hold down clamp for undertaking end grain work. The main fences can be set independently and feature micro adjustment. The table has three pairs of tapped holes so the fence can be easily repositioned to accommodate different sizes of workpiece. Also, when profiling, the fence can be reversed so the operator does not need to lean over the sliding table and can work comfortably from the other side of the machine utilising the main cast table itself. A dust extraction hood is fitted to the main fence and guard area and a no-volt release switch is included.
Fence

Fence

Table features 3 sets of holes so the fence mount can be slotted to accommodate a wide range of fence positions.
Mounting System

Mounting System

The universal router mounting system can accept virtually any router due to the adjustable clamps and two sets of T-slots either side of the aperture.
Gas Springs

Gas Springs

Gas springs help lift the cast iron table, allowing easy access to the underside of the router table.

Clamp

Clamp

A heavy duty clamp holds the timber in position preventing any movement or slipping while undertaking end grain work and can be re-positioned and clamped at an angle when required.

Pressure Pad Included

Pressure Pad Included

The pressure pad helps to hold the workpiece against the fence to eliminate slipping.

Sliding Carriage

Sliding Carriage

The sliding carriage makes accurate end grain work much easier.

Reversible Fence

Reversible Fence

If you prefer to profile on the cast table without leaning over the sliding table, the fence can be quickly and easily mounted the other way round so you can work from the cast iron side.

Dust Extraction

Dust Extraction

An extraction hood is fitted, with a 57 mm diameter outlet, designed to draw dust and chippings away from the user.

Independent Adjustment

Independent Adjustment

Both fences operate independently and offer micro-adjustment.

Collet Extension

Collet Extension

This collet provides a 2” extension on a router with a 1/2” collet. An essential accessory when using a router table because without this extension the router cutter would not have sufficient height to sit far enough above the table for use.

Cast Iron Table Size: 783 x 250 mm

Extraction Port Diameter: 57 mm

Weight: 54 kg

Size: H850 x W784 x D560 mm

5 Star Rating5 Star Rating5 Star Rating5 Star Rating5 Star Rating
Good but could be better
I have been using this table for a few months and as much as it is good I do have some suggestions as to how it can be improved. First: the holes in the cast iron that hold the fe...
Read Full Review
Download
RPMS-R-MK2 Manual 3.1

PDF reader required

 
RPMS-R-MK2 Heavy Cast Router Table with Sliding Table
RPMS-R-MK2
£449.99
Cast Iron Table Size
783 x 250 mm
Extraction Port Diameter
57 mm
Weight
54 kg
Size
H850 x W784 x D560 mm