1 1/4" x 8 TPI Lathe Accessories
CWA95 Live Centre - 2 Morse Taper
(CWA95)A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. The sealed for life bearings ensure reliable, long lasting operation.
£26.99
CWA141 1/2" Drill Chuck - 2 Morse Taper, Max Capacity 13 mm
(CWA141)For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.
£24.99
CWA151 3/4" Drill Chuck - 2 Morse Taper, Max Capacity 20 mm
(CWA151)For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.
£34.99
CWA131-2MT Long Hole Boring Kit - 2 Morse Taper
(CWA131-2MT)The perfect tool for making long, uniform apertures through workpieces on the lathe. Ideal for lampstands, as the hole bored is 5/16”, to accept standard bulb holders.
£49.99
CWA72 4" Steel Faceplate - 1 1/4" x 8TPI, Max Capacity 15"
(CWA72)Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. A rough guide to a faceplate’s capacity is that pieces can be turned up to three times the diameter of the faceplate they are mounted on.
£19.99
CWA74 6" Diameter Steel Face Plate (1-1/4" X 8TPI Left Hand Thread)
(CWA74)Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. A rough guide to a faceplate’s capacity is that pieces can be turned up to three times the diameter of the faceplate they are mounted on.
£19.99
