Close

Pipebending Equipment

3/4" x 16TPI Lathe Accessories

CWA61 2-1/2
CWA61 2-1/2" Woodscrew Chuck - 3/4" x 16 TPI
(CWA61)

This features two extra screw holes adjacent to the centre screw, allowing greater hold so it can be used as a faceplate; ideal for work that is too small for a standard faceplate. For even greater hold, the standard supplied number 14 1 1/4” woodscrew can be replaced with a longer alternative.

£22.99

CWA152 3/4
CWA152 3/4" Drill Chuck - 1 Morse Taper
(CWA152)

For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.

£34.99

CWA111 5/16
CWA111 5/16" Shell Auger for Long Hole Boring
(CWA111)

Can be used for boring up to 40" between centres. Requires CWA92 cup centre or supplied together as CWA131 Long Hole Boring Kit.

£19.99

CWA131 Long Hole Boring Kit - 1 Morse Taper
CWA131 Long Hole Boring Kit - 1 Morse Taper
(CWA131)

The perfect tool for making long, uniform apertures through workpieces on the lathe. Ideal for lampstands, as the hole bored is 5/16”, to accept standard bulb holders. 1 Morse Taper.

 

Record Power's Long Hole Boring Tutorial with Alan Holtham from Record Power on Vimeo.

£49.99

CWA80 4 Pong Drive Centre 1 Morse Taper
CWA80 4 Pong Drive Centre 1 Morse Taper
(CWA80)

Designed to hold wood securely without splitting, this drive centre gives superior hold. The opposing tooth profiles mean that as they enter the wood, the fibres are pushed together rather than apart, holding the timber together.

£14.99

CWA93 Live Centre - 1 Morse Taper
CWA93 Live Centre - 1 Morse Taper
(CWA93)

A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. Sealed for life bearings ensure reliable, long lasting operation.

£21.99

CWA142 1/2
CWA142 1/2" Drill Chuck - 1 Morse Taper, Max Capacity 13 mm
(CWA142)

For drilling accurately through the centre of the workpiece on the lathe, there is no better option than a drill chuck. Designed to hold drill bits, expansive cutters, Forstner bits and other hexagonal shaft bits. They can also be used in the headstock to hold small work such as pen blanks, thanks to the precision made engineering jaws, which ensure a central grip.

£29.99

CWA70 4
CWA70 4" Cast Iron Faceplate - 3/4" x 16TPI, Max Capacity 15"
(CWA70)

Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. A rough guide to a faceplate’s capacity is that pieces can be turned up to three times the diameter of the faceplate they are mounted on.

£14.99

CWA71 6
CWA71 6" Cast Iron Faceplate - 3/4" x 16TPI, Max Capacity 24"
(CWA71)

Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. A rough guide to a faceplate’s capacity is that pieces can be turned up to three times the diameter of the faceplate they are mounted on.

£19.99